Which Sandpaper Grit for Drywall
Sanding drywall is a critical step that determines the quality of your final surface. Even the most skilled joint compound application can appear rough if the sanding is not executed correctly. Knowing which grit sandpaper to use for drywall to use at different stages ensures that your surface becomes perfectly flat and uniform. The process is based on finesse and proper grit selection.
When performed carefully, drywall sanding levels joints, eliminates imperfections, and results in a flawless, seamless surface ready for painting.
Importance of Sandpaper Grit in Drywall Sanding
The grit number on sandpaper shows how coarse or fine the abrasive surface is. A smaller number means the sandpaper is coarse and removes material quickly, while a larger number creates a fine surface. Choosing the right drywall sanding grit prevents damage such as surface gouging, swirl marks, or uneven surfaces.
If the grit is too coarse, it can expose joint tape or leave swirl marks that show up under paint. If it’s too fine too early, it can fail to remove ridges effectively. The goal is to move gradually from medium to fine grit for a seamless finish.
Recommended Sandpaper Grit for Drywall Stages
Professional drywall finishers typically follow a progressive grit progression to achieve optimal results:
• 100–120 grit: Ideal for rough sanding to remove high areas after joint compound application. This grit should be used with care to prevent surface tearing.
• 120–150 grit: Perfect for blending seams once the major imperfections are removed. This grit provides the main levelling phase.
• 180–220 grit: Finishes the surface for primer application. It creates a consistent surface without imperfections.
This sequence ensures each layer of compound is evenly finished, resulting in a paint-ready wall.
Must-Have Drywall Sanding Tools
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain consistent sanding results, reduces fatigue, and keeps dust under control.
Common tools include:
• Hand sander for detail work
• Pole sander for high or wide wall sections
• Sanding sponges for corners and curved areas
• Perforated sandpapers for dust reduction
• Mask to prevent dust exposure
• Side lighting to identify flaws
These tools help ensure even finishes without damaging the drywall paper.
How to Sand Drywall Like a Pro
Sanding drywall is a careful process. Following professional techniques prevents common surface flaws and ensures your work looks flawless once painted.
1. Let the Joint Compound Dry Completely
Always wait for the compound to dry fully before sanding. Partially dried mud will create lumps and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for smooth sanding.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining consistent motion. Excessive pressure can expose tape.
3. Feather the Edges
Blend the joint compound smoothly into the drywall using gentle sweeping motions. Focus on edges rather than flat surfaces to create a seamless appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight flaws that might not be visible head-on. This ensures all marks are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This what grit sandpaper for sanding drywall? stage polishes the surface and prepares the wall for the final coat.
Sanding Corners and Tight Spots
Corners and edges need gentle technique. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with controlled movement to avoid damaging what grit sandpaper for sanding drywall? the tape or paper.
For inside corners, a few light passes are usually enough to smooth transitions without thinning the surface material. Controlled sanding is the key to maintaining joint integrity.
What Not to Do When Sanding Drywall
Many DIY finishers make the mistake of being too aggressive or skipping crucial steps. To achieve a smooth outcome, avoid the following:
• Oversanding that exposes joint tape
• Starting with too low a grit number
• Forcing the sandpaper into the wall
• Neglecting to check under light
• Ignoring safety precautions such as dust masks
Time, care, and accuracy matter more than speed during drywall sanding.
Final Steps Before Painting Drywall
Before applying paint, ensure that the wall is completely free from dust and residue. Wipe the surface with a microfibre cloth or a vacuum attachment designed for drywall dust. Check all areas under angled light to confirm a consistent finish. Using 180–220 grit sandpaper for drywall before painting ensures a even and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to adhere smoothly, preventing blotches and ensuring a professional result.
Final Thoughts
Mastering what grit sandpaper for drywall to use at each stage can significantly improve the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that professional surface.
By combining the right tools, lighting, and a consistent technique, you can achieve a flawless drywall finish that looks impeccable under any paint or lighting condition. Consistency and patience are the true secrets to expert-level drywall finishing.